| Specification | Description |
|---|---|
| Capacity | 33 Tons |
| Thick Turret Stations | 58 |
| Auto Index Stations | 2 |
| Sheet Capacity | 60" x 72" |
| Refurb Cost | |
| Rebuilt Cranfshaft, bushings, seals, bearings | $5800 |
| Replace swivel ass'y | $780 |
| Replace Hyd bladder and recharge | $480 |
| Replace pulley ass'y | $375 |
| Replace belts | $275 |
| Replace tool balancer regulator | $78 |
| Replace main air regulator | $375 |
| Replace over ride plate and rewire | $240 |
| Replace Hyd cooling fan | $260 |
| Replace control cooling fan | $175 |
| Replace worn turret keys and align stations | $1350 |
| Replace auto index sleeves | $1098 |
| Replace front tool change door | $800 |
| Replace rear upper tool change door | $800 |
| Replace table skins front and rear | $1600 |
| Replace table support rails | $540 |
| Replace all dry rotted airlines | $840 |
| Replaced Hyd oil and filter | $650 |
| Replaced all membranes on control panel | $540 |
| Trouble shoot and reapair A/I problem | $320 |
| Replaced missing Y axis motor cover | $295 |
| Replace 2 clamp bases and square | $680 |
| Replace Y axis rubber stopper | $135 |
| Replace tool balancer lifting lug | $85 |
| Rebuild Y axis ballscrew to +/- .0002' spec | $695 |
| Replace/rework front and rear lower tool change doors | $1100 |
| Replace sub control panel X axis | $125 |
| Replace missing grease fittings | $130 |
| Repaint Black and Orange Amada colors | $3500 |
| Replace Decals | $125 |
| Resleeved 13 stations as needed | $4111 |
| Square tables, calibrate machine and set to spec | $640 |
| Rig and Transport to Tucker, GA | $1512 |
| Disconnect and prepare for shipment | $1280 |
| Total Parts and Labor | $31,789.00 |
301 Post Office Drive, Suite D
Indian Trail, NC 28079
704-821-7370 tel
704-821-7392 fax
info@charlestonannex.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers