Milling Machines / Horizontal -Used Machinery: Cincinnati Wide Knee Mill

Cincinnati Wide Knee Mill

Stock Number: 0990

Cincinnati #6

Serial No. 356P1W-2      Age: 1950

Milling Machines / Horizontal -Used Machinery: Cincinnati Wide Knee Mill, Click to view larger photo...       Milling Machines / Horizontal -Used Machinery: Cincinnati Wide Knee Mill, Click to view larger photo...       Milling Machines / Horizontal -Used Machinery: Cincinnati Wide Knee Mill, Click to view larger photo...       Milling Machines / Horizontal -Used Machinery: Cincinnati Wide Knee Mill, Click to view larger photo...      
Click to view larger photo

SpecificationDescription
Table Working Surface:23" x 104-1/2"
Range - Longitudinal:60"
- Cross:14"
- Vertical (knee):20"
Taper in Spindle:#50
Max Height Spindle Center to Table:20"
(14) Spindle Speeds:14-1400 RPM
(32) Feeds - Longitudinal & Cross:3/8-90 IPM
(32) Vertical Feeds:3/32 -22-1/2"
Rapid Traverse Rate:150 IPM

Equipped With:
Wide-Knee, Dynapoise Over Arm, Automatic Backlash Eliminator, (2) Arbor Supports, Rear Duplicat Controls, Speed Power and Feed Changes, Auto Table Cycle, Swivel Milling Vise, (6) No.50 Arbors with Sleeves, (2) No.50 Holders, Misc. Cutters, 50 H.P. 3/60/220-440 Volt Motro w/Controls, Wired for 3/60/440 Volt Operation, Approx. Weight 16,200 lbs., Floor Space Required 181-1/2"LR x 102-3/4"FB x 77-5/8" High


HomeIndexContactView Cart


Milling Machines / Horizontal -Used Machinery: Cincinnati Wide Knee Mill
301 Post Office Drive, Suite D
Indian Trail, NC 28079
704-821-7370 tel
704-821-7392 fax
info@charlestonannex.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com