Lathes - Used Machinery: 24" x 12' LeBlond Regal Engine Lathe

24" x 12' LeBlond Regal Engine Lathe

Stock Number: 1620

LeBlond 5" Thru Spindle

Serial No. 7HS-632 Age: 1980

Condition: Very Good

Click to view larger photo

Specification	Description
Swing Over Bed and Carriage Wings:	26"
Swing Over Cross Slide:	18-1/4"
Distance Between Centers:	144"
(15) Spindle Speeds:	16 to 1200 RPM via Gear Change
Spindle Nose:	A-1-11
Spindle Bore Size:	5-1/4" Thru
Hole Thru 18" Chuck:	5"
Spindle Bore Taper:	#5 Morse
(48) Threads Per Inch Range:	2 to 112
(48) Feed Ranges:	.0036" to .205" Per Revolution
(10) Metric Threads Per MM Range:	.3mm to 2.4 mm per Revolution
(2) Gears are Missing, 25T & 64T Gears:	Have 48 Tooth Gear
Tailstock Quill Size:	3 1/8" Diameter
Tailstock Quill Taper:	#5 Morse
Tailstock Quill Travel:	7-1/2"
Tailstock Set Over Right or Left:	1"
Leadscrew Size:	1-7/16" Diameter x 4 Threads
Steady Rests Capacity:	3/4" to 7" & 7" to 12"

Equipped With:
Hard Replaceable Bed Ways in Good Condition, (2) Removable Chip Pans, Rapid Traverse to Carriage, Driven via a Separate Electric Motor, (1) Positional Screw and Shaft Support Bracket, (1) 18" 3-Jaw Chuck with Adjustable Tru Style Back and 2-Piece Hard Reversible Top Jaws, (1) Chuck Wrench, (1) Tailstock Wrench, (2) Roller Type Steady Rests, Rear of Spindle Tube Not Threaded or Machined for Chuck Mounting, Items not with Machine: Tool Post, Thread Chasing Dial, Carriage Clamping Assembly (1) Jacobs Drill Chuck, Parts and Operation Manual, Warner Adjustable Motor Brake, 20 HP, 1150 RPM Main Motor Wired for 3 Phase, 230/460 Volts, Presently Wired for 230 Volts, 59.38 FL Amps Arranged for Coolant BUT NO Coolant Pump or Piping

301 Post Office Drive, Suite D
Indian Trail, NC 28079
704-821-7370 tel
704-821-7392 fax
info@charlestonannex.com

Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com